Car Headlights Check Details

- Jan 01, 2018 -

Auto lamp inspection to check the four corners of the vehicle, four lights glow is normal, mainly includes: clearance light, low light, high beam, danger alarm lights, lights, back light, brake light, and high brake lights, license plate lamp, etc. Car lamp inspection is essential for new car inspection. Therefore, it is necessary to check carefully, and the inspection of this step usually requires two people to cooperate. After all, when you hit the brake, you can not divide your birth to see if there is a problem with the brake light in the back.

Mainly check the following car headlights:

Check for the front turn light and side turn light: amber, turn, turn, turn on, to remind you of the movement of the vehicle behind and side.

Check the headlights: when the car owner is in reverse gear, it will open automatically, it is similar to the white transparent lamp, the main cue to the rear pedestrian, obstacle and reverse the lighting use.

Check brake lights: red, mainly divided into left and right brake lights, brake lights and high current are obstacles, as long as you a brakes, three at the back of the brake lights would light up, to prevent the crash.

Close light lamp, the inspection of the floodlight: white, the near light that the main use on market is halogen lamp or xenon lamp. In car headlamp inspection, the high light is easy to be ignored, so be sure to remember to check carefully.

Inspection of fog lamp: yellow color, divided into former fog lamps and rear fog lamps. It is mainly used in rainy and foggy days. Because the visibility of rain and fog is relatively low, the fog lamps with yellow color are stronger and can be used to remind others to find their vehicles earlier.

After all kinds of car lighting inspection, check whether there is fog in the lampshade, if there is fog, it may be the car lamp is not well sealed. This step is often overlooked in new car inspection, because the new car is not moving, and sometimes it is not well sealed and hard to see. So, if you have the conditions, pour a little water over it to see if it's better.

Next to check whether the auto lamp installation is smooth, and whether the border around the line, sometimes the headlight is not appropriate, it may lead to the lamp and the surrounding the aperture small, large or uneven, but also to see if lights on either side of the symmetry,

Helpful hints: auto lamp inspection, in all of the new vehicle examination matters needing attention, one of the steps is relatively simple, but because in the process of the installation in the overall car headlights, easy problems, check this link, so also is doing also should be taken seriously.

Related News

Related Products

  • Flush-Mount Round LED Truck and Trailer Light – 4'' Tail/Stop/Turn Light W/ 7 LEDs + Chrome Bezel
  • LED Rear Combination Lamps - 3 Rubber Round Halo Lamps 57 LEDs Truck Trailer Sealed Stainless Steel
  • LED Round 2.76''*1.5'' Clearance Light Side Marker Light W/ 4 SMD LEDs
  • LED 6.3''*1.97''*0.94'' Shuttle Clearance Light Side Marker Light Indicator Light W/ 12 LEDs + Steel Base
  • Triple LED Face Stalk Side Marker Lamp Truck Trailer Chassis Camper Caravan
  • 700W Modified Sine Wave Power Inverter DC 12V to AC 110V